34
Monitoring and Operating the Projector Using a Web Browser
Every Month on Day:
Check this check
box and select the day from the drop-
down list to have e-mail sent on the
selected day every month. The report
contains product information, owner
information, hours of use, lamp mode,
memos, etc.
Maintenance Report
Lamp Reminder:
Check this check box and
enter the replacement time of the
projector lamp in the text box. This
information is used to have e-mail sent
informing you that lamp replacement is
required when the preset time has
reached. You can specify the time
between 1 and 9999 hours.
Maintenance Reminder:
Check this check
box and enter the time of use before
maintenance is required for the projector
in the text box. This information is used
to have e-mail messages sent informing
you that maintenance of the projector is
required when the preset time has
reached. You can specify the time
between 1 and 99999 hours.
The length of time that elapsed since you
reset is displayed in the Elapsed Hours
text box. Checking the RESET check
box and clicking [Apply] resets the
elapsed time to zero.
x
Address field
Email Address
Enter the e-mail address to which you wish
e-mail messages sent in each text box. You
can have e-mail sent to four different
addresses at the same time. You can enter up
to 64 characters for each address.
Report Timing
Regular:
Check this check box to have the
Regular Report sent.
Maintenance:
Check this check box to have
the Maintenance Report sent.
Error:
Check this check box to have an
error report sent when any trouble
occurs with the projector.
• Even if days are specified in the Report
Timing field, the Regular Report will not be
sent if you do not check the Regular check
box. If the day preset in [Every Month on
Day] does not exist in the month, you will
receive the Regular Report on the last day of
the month.
• You cannot specify the day of the week or
day of the month if the [Every Week on
Days] or [Every Month on Day] check box is
not checked.
x
Mail Form field
Select the e-mail message type from
[Standard] or [Simple].
x
Mail Account field
Mail Address:
Enter the appropriate e-mail
address. You can enter up to 64
characters.
Outgoing Mail Server (SMTP):
Enter the
address of the SMTP server. You can
enter up to 64 characters.
Required Authentication:
Check this
check box if authentication is required
for sending e-mail.
Requires the use of POP Authentication
before send e-mail (POP before
SMTP):
Check this check box to
arrange for POP authentication to be
performed before connecting to the
SMTP server.
Incoming Mail Server (POP3):
Enter the
address of the POP3 server.
Account Name:
Enter the mail account.
Password:
Enter the mail password.
SMTP Authentication:
Check this check
box to arrange for SMTP authentication
to be performed before connecting to the
SMTP server.
Account Name:
Enter the mail account.
Password:
Enter the mail password.
Send test mail:
Check the Send check box
then click [Apply] to have e-mail
messages sent as a test to confirm
whether it is sent to the specified
addresses.
• If the following items have not been set or
are incorrectly set, an error message
appears and the test mail is disabled:
– [Address] in the Address field
– [Mail Address] and [Outgoing Mail Server
(SMTP)] in the Mail Account field
Notes
Notes
Summary of Contents for 4-125-572-12 (1)
Page 47: ...Sony Corporation ...
