DR-BT101_4-130-181-52(1)
14
US
OPERATING THE UNIT
Listening to music
POWER button
Jog switch
VOL + button
VOL – button
This unit supports SCMS-T content
protection. You can enjoy music, etc.,
from a device such as a mobile phone
or portable TV that supports SCMS-T
content protection.
Check the following before operating
the unit.
– The
Bluetooth
device is turned on.
– Pairing of this unit and the
Bluetooth
device is complete.
– The
Bluetooth
device supports the
transmitting music function (profile:
A2DP*).
1
Press and hold the POWER
button for about 2 seconds
while the unit is turned off.
The indicator (blue) and indicator
(red) flash together twice and the
unit turns on.
Note
After the unit is turned on, the unit
attempts to connect to the last connected
Bluetooth
device automatically with HFP
or HSP.
When not calling with this unit, do not
make the last connected
Bluetooth
device
ready for HFP or HSP connection. To
make or receive a call while playing back
music, see page 20.
2
Make the
Bluetooth
connection
(A2DP) from a
Bluetooth
device
to this unit.
Refer to the operating instructions
supplied with the
Bluetooth
device
on how to operate it.
Start playback on the
Bluetooth
device.
Tip
Bluetooth
connection of A2DP (Advanced
Audio Distribution Profile) can also be
operated with the jog switch from this unit to
the
Bluetooth
device except when making a
call on this unit.
Notes
When you play music by connecting the
unit to a
Bluetooth
device using HSP
(Headset Profile), sound quality will not be
high. For better sound, change the
Bluetooth
connection to A2DP by
operating the
Bluetooth
device.
If this unit is turned off while an A2DP
Bluetooth
connection is established,
operate the unit again from step 1 to make
the A2DP
Bluetooth
connection again.
* For detail on profiles, see page 4.
