background image

5

GB

About This Manual

• The instructions in this manual are for model 

 

STR-DH510. Check your model number by 
looking at the lower right corner of the front panel.

• In this manual, models of area code ECE is used 

for illustration purposes unless stated otherwise. 
Any difference in operation is clearly indicated in 
the text, for example, “Models of area code ECE 
only”.

• The instructions in this manual describe the 

controls on the supplied remote. You can also use 
the controls on the receiver if they have the same 
or similar names as those on the remote.

This receiver incorporates Dolby* Digital and Pro 
Logic Surround and the DTS** Digital Surround 
System.
* Manufactured under license from Dolby 

Laboratories. Dolby, Pro Logic, and the double-
D symbol are trademarks of Dolby Laboratories.

** Manufactured under license under U.S. Patent 

#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 
6,487,535 & other U.S. and worldwide patents 
issued & pending. DTS and DTS Digital 
Surround are registered trademarks and the DTS 
logos and Symbol are trademarks of DTS, Inc. 

 

© 1996-2008 DTS, Inc. All Rights Reserved.

This receiver incorporates High-Definition 
Multimedia Interface (HDMI

TM

) technology.

HDMI, the HDMI Logo, and High-Definition 
Multimedia Interface are trademarks or registered 
trademarks of HDMI Licensing LLC in the United 
States and other countries.

“x.v.Colour (x.v.Color)” and “x.v.Colour 
(x.v.Color)” logo are trademarks of Sony 
Corporation.

“BRAVIA” is a trademark of Sony Corporation.

“PLAYSTATION” is a trademark of Sony 
Computer Entertainment Inc.

About area codes

The area code of the receiver you purchased is 
shown on the lower right portion of the rear panel 
(see the illustration below).

Any differences in operation, according to the area 
code, are clearly indicated in the text, for example, 
“Models of area code AA only”.

SURROUND

CENTER

L

L

R

R

SPEAKERS

FRONT

4-XXX-XXX-XX (X) AA

Area code

On Copyrights

Summary of Contents for 4-168-043-14(1)

















































































Reviews: