66
GB
Changing the input button
assignments
You can change the initial settings of the input
buttons to suit the components in your system.
For example, if you connect a Blu-ray disc
player to the DVD jack on the receiver, you
can set the DVD button on this remote to
control the Blu-ray disc player.
Note
You cannot change the remote assignments for
DMPORT, TUNER and TV input buttons.
1
While holding down the input
button of which you want to
change the assignment, hold
down AV
?
/
1
.
Example: While holding down DVD,
hold down AV
?
/
1
.
2
With the AV
?
/
1
button held,
release the input button you
selected in step 1.
Example: With the AV
?
/
1
button held,
release DVD.
3
Referring to the following table,
press the corresponding
button for the category you
want, then release AV
?
/
1
.
Example: Press 1, then release AV
?
/
1
.
Now you can use the DVD button to
control the Blu-ray disc player.
Categories and the
corresponding buttons for BD,
DVD, SAT/CATV, VIDEO and
SA-CD/CD
a)
For details on the BD1 or BD3 setting, refer to the
operating instructions supplied with the Blu-ray
disc player or Blu-ray disc recorder.
b)
Sony DVD recorders are operated with a DVD1 or
DVD3 setting. For details, refer to the operating
instructions supplied with the DVD recorders.
c)
Sony VCRs are operated with a VTR 2 or VTR 3
setting which corresponds to 8 mm and VHS
respectively.
d)
RM-AAU071 only.
e)
RM-AAU074 only.
Using the Remote
BD
DVD
SAT/
CATV
VIDEO
SA-CD/
CD
DMPORT
TUNER
TV
Assignable
Input
buttons
Numeric
buttons
AV
?
/
1
Categories
Press
Blu-ray disc player
(command mode BD1)
a)
1
Blu-ray disc recorder
(command mode BD3)
a)
2
DVD player
(command mode DVD1)
3
DVD recorder
(command mode DVD3)
b)
4
VCR (command mode VTR3)
c)
5
CD player
6
DSS (Digital Satellite Receiver)
d)
/
Euro Digital Satellite Receiver
e)
7
