52
The camera detects faces, adjusts the focus, exposure, performs image
processing, and adjusts flash settings. The Face Detection function is set to
[On] in the default setting.
The Face Detection frame
To deactivate the Face Detection function
Fn button
t
(Face
Detection)
t
[Off]
• Compose to overlay the Face Detection frame and the AF area.
Notes
• The Face Detection function cannot be used in viewfinder mode or with the manual
focus check function.
• Up to eight faces can be detected.
Using the Face Detection function
When the camera detects faces, white
Face Detection frames appear. When the
camera judges that autofocus is possible,
the Face Detection frames turn orange.
When you press the shutter halfway
down, the Face Detection frames turn
green.
• If a face is not positioned inside the AF
area available when you press the
shutter button halfway down, the AF
area that is used for focusing turns
green.
• When the camera detects multiple
faces, the camera automatically selects
a priority face and the single Face
Detection frame turns orange.
Face Detection frames (orange)
Shooting technique
Face Detection frames (white)
Summary of Contents for a500
Page 178: ...178 ...
