GB
89
Othe
rs
Troubleshooting
If you experience trouble with the camera, try the following solutions.
The battery pack cannot be installed.
• When you insert the battery pack, use the tip of the battery pack to push the
lock lever (page 17).
• You can use an NP-FW50 battery pack only. Make sure that the battery is
NP-FW50.
The remaining battery level indicator shows incorrect level or
power runs out quickly despite the indicator showing sufficient
battery level.
• This phenomenon occurs when you use the camera in an extremely hot or
cold location.
• The battery pack is discharged. Install a charged battery pack (page 17).
• The battery pack is dead. Replace the battery pack with a new one.
Cannot turn the camera on.
• Install the battery pack correctly (page 17).
• The battery pack is discharged. Install a charged battery pack (page 17).
• The battery pack is dead. Replace the battery pack with a new one.
1
Check the items on pages 89 to 93. Also refer to “
α
Handbook” (PDF).
2
Remove the battery pack, wait for about one minute, re-
insert the battery pack, and then turn on the power.
3
Reset the settings (page 67).
4
Consult your Sony dealer or local authorized Sony service
facility.
Battery pack and power
Summary of Contents for AC-UB10C
Page 107: ...GB 107 Others ...