GB
79
C
on
nec
tin
g th
e c
a
me
ra
to
a ne
tw
or
k
x
Access Point Settings
• When aboard an airplane, turn off the camera.
Saving images to a computer
You can save images on the camera to a computer that is connected to a
network. Before saving, install the software “PlayMemories Home” on your
computer, connect the computer and the camera using a USB cable, and
register the camera to “PlayMemories Home.”
• Depending on the application settings on your computer, the camera may turn off
automatically after the images have been saved.
1
Select MENU
t
[Setup]
t
[Access Point Settings].
2
Select the access point you want to register.
If the desired access point is displayed on the screen:
Select the access point.
If the desired access point is not displayed on the screen:
Select [Manual Setting] and set the access point following the instructions
on the screen.
• For details, refer to “
α
Handbook.”
Notes
1
Select MENU
t
[Playback]
t
[Send to Computer].
Notes
Summary of Contents for AC-UB10C
Page 107: ...GB 107 Others ...
