84
Adjusting the volume using the Energy Station
You can adjust the AIBO
®
Entertainment Robot’s volume while the AIBO robot is on the
Energy Station.
Caution
•
When the AIBO robot is not on the Energy Station, you cannot change the setting. If you attempt to
change this setting when the AIBO robot is not on the Energy Station, the pump and battery indicators
on the LCD display will flash for several seconds to indicate that the AIBO robot is not on the Energy
Station.
•
To turn ON the display panel backlight, press the LIGHT/+ button. The backlight stays on for about 60
seconds when the AIBO robot is on the Energy Station, and for about four seconds when the AIBO robot
is not on the Energy Station.
1
Place the AIBO robot on the Energy Station.
2
Press the MODE/NEXT button repeatedly until the volume level indication
appears.
Each push of the MODE/NEXT button cycles
through the display indications for date
t
time
t
time zone
t
volume.
3
Press the SET/CANCEL button.
The current volume level setting starts to flash.
4
Use the DISPLAY/- or LIGHT/+ buttons to change the volume level. Then
press the MODE/NEXT button.
The volume level indication appears again, and the setting is transferred to the AIBO
robot.
The volume level can be set from “0” to “3”. If you select “0”, the AIBO robot’s sound
is muted.
Caution
To cancel the setting process, press the SET/CANCEL button. The initial indication appears again, and the
volume setting is not changed.
Summary of Contents for Aibo ERS-7
