108
Selecting the shooting mode
Notes
• The
(Camera shake warning) indicator is not indicated in manual exposure
mode.
• When the mode dial is set to M, the ISO setting [AUTO] is set to [100]. In M mode,
the ISO setting [AUTO] is not available. Set the ISO sensitivity as necessary
(page 139).
• Press the button when you shoot with the flash. However, the flash range differs
according to the aperture value. When you shoot with the flash, check the flash range
in “Specifications.”
Manual shift
You can change the shutter speed and aperture value combination without
changing the exposure you set.
3
Shoot the image after the
exposure is set.
• Check the exposure value on the EV
scale (Metered Manual*) when
monitoring with the viewfinder.
: Images become brighter.
Toward –: Images become darker.
The
b
B
arrow appears if the set
exposure is beyond the range of the EV
scale. The arrow starts flashing if the
difference becomes greater.
* When the camera is in M mode, it will
show an under or over compensation
value based on the correct exposure
using the index on the exposure
compensation indicator.
In viewfinder mode
Standard value
Rotate the front or rear control dial while
pressing the AEL button to select the
shutter speed and aperture value
combination.
AEL button