73
Viewing images on a computer
Using the software
Log on as Administrator.
Notes
• If “PMB” has already been installed on the computer, and the version of the
previously installed “PMB” is higher than that of the “PMB” on the CD-ROM
(supplied), installation is not required. The usable functions are activated when the
camera is connected to the computer using the USB cable.
Installing the software (Windows)
1
Turn on your computer, and insert the CD-ROM (supplied) into
the CD-ROM drive.
The installation menu screen appears.
• If it does not appear, double-click [Computer] (For Windows XP: [My
Computer])
t
(SONYPMB)
t
[Install.exe].
• If the AutoPlay screen appears, select “Run Install.exe” and follow the
instructions that appear on the screen to proceed with the installation.
2
Click [Install].
Make sure that both “Image Data Converter” and “PMB” are checked and
follow the instructions on the screen.
• Connect the camera to the computer during the procedure following the
instructions on the screen (page 191).
• When the restarting confirmation message appears, restart the computer
following the instructions on the screen.
• DirectX may be installed depending on the system environment of your
computer.
3
Remove the CD-ROM after the installation is complete.
The following software is installed and shortcut icons appear on the desktop.
“Image Data Converter”
“PMB”
“PMB Launcher”
“PMB Help”