Precautions
Handling the Built-in MOTION EYE Camera
❑
Do not touch the lens protection cover of the built-in
MOTION EYE
camera, as it may cause scratches on the cover and
such scratches will appear on the captured images.
❑
Do not let the direct sunlight get into the lens of the built-in
MOTION EYE
camera regardless of your computer's power
state, as it may cause the camera to malfunction.
❑
The built-in
MOTION EYE
camera is disabled while videos or still images are imported from an i.LINK-compatible device
connected to the i.LINK port.
❑
Clean the lens protection cover of the built-in
MOTION EYE
camera with a blower brush or a soft brush. If the cover is
extremely dirty, wipe it off with a soft dry cloth. Do not rub the cover, as it is sensitive to pressure.
