![background image](http://html.mh-extra.com/html/sony/bdkp-d1003/bdkp-d1003_installation-manual_411057025.webp)
3-5 (E)
BDX-D1000
3-3. ISR
3-3-2. Usage of ISR Functions
The ISR function is controlled by Sony application
program software.
For the program software, usage, installation, and opera-
tion of a personal computer in which this program software
can be used, contact your local Sony Sales Office/Service
Center.
The preparation below is required when managing the
BDX-D1000 by ISR.
1.
Connect a personal computer to the RS-232C connec-
tor (D-sub 9-pin) of the BDX-D1000 using a RS-232C
cross cable.
2.
Set the DIP switch S200-4 on the DEC-99 board to
ON (lower position).
3.
Install the ISR application program software to the
personal computer.
BDX-D1000 rear panel
Personal computer
RS-232C cross cable
DEC-99 board
1
2
3
4
5
6
7
8
A
B
C
S200
A side (Component side)
1 2 3 4
S200
ON
5 6