29
Set
tings
and
Ad
ju
st
m
e
nt
s
4K Output
Auto: Outputs 4K/24p video signals
automatically if you connect a 4K/
24p -compatible device and make
the appropriate settings in [BD-
ROM 24p Output] or [DVD-ROM
24p Output], and also outputs 4K/
24p photo images if you play 2D
photo files.
Off: Turns off the function.
YCbCr/RGB (HDMI)
Auto: Automatically detects the
connected TV type, and switches to
the matching colour setting.
YCbCr (4:2:2): Outputs YCbCr 4:2:2
video signals.
YCbCr (4:4:4): Outputs YCbCr 4:4:4
video signals.
RGB: Outputs RGB video signals.
HDMI Deep Colour Output
Auto: Normally select this.
16bit/12bit/10bit: Outputs 16bit/12bit/
10bit video signals when the
connected TV is compatible with
Deep Colour.
Off: Select this when the picture is
unstable or colours appear
unnatural.
SBM
(Super Bit Mapping)
On: Smooths the gradation of video
signals output from the HDMI OUT
jack.
Off: Select this when outputting
distorted video signals or unnatural
colour.
Pause Mode
Auto: Normally select this. Dynamic
moving pictures appear without
blurring.
Frame: Displays static pictures at high
resolution.
Audio Settings
Audio (HDMI)
Auto: Normally select this. Outputs
audio signals according to the status
of the connected HDMI device.
PCM: Outputs PCM signals from the
HDMI OUT jack.
DSD Output Mode
On: Outputs DSD signals from the
HDMI OUT jack when playing a
Super Audio CD. When [On] is
selected, no signal is output from
other jacks.
Off: Outputs PCM signals from the
HDMI OUT jack when playing a
Super Audio CD.
BD Audio MIX Setting
On: Outputs the audio obtained by
mixing the interactive and
secondary audio to the primary
audio.
Off: Outputs the primary audio only.
Select this to output HD audio
signals to an AV amplifier
(receiver).
Dolby Digital / DTS
Downmix PCM: Converts to output
Linear PCM signals. Select this
when connecting an audio device