1-25
BDP-BX37/S270/S370/S373/S470
1-5-3. Front USB(USB-008) and Harness(SIM-001) dressing for BDP-BX37/S370:US,CND,PX,TW,E,BR,AR/
S470:US,CND,TW,E,BR,AR)
1
1- Slot in the USB harness (USB-008) to the cable holder
2
3
2- Place the cable holder and align with chasis hole
3- Insert USB harness (USB-008) to CN602
4
4- Place the Nylon Rivet on the hole chasis together with cable holder
5
6
6- Pull harness (SIM-001) through the board to board between P/S and MB;
5- Insert connector - CN301 to Power block (CN2)
and insert the harness to CN1509
7
8
7- Insert FFC cable (FIM-026) to CN702 and fold the first end of the
FFC.
Caution Point:
Make sure harness (SIM-001) is
under the cable holder
8- Push in the FFC through the chasis hole and insert the second end
of it into CN1504.
