18
[BD/DVD Viewing
Settings]
[Parental Control
Settings]
x
[Dolby Digital]
[Downmix PCM]: Converts to output Linear
PCM signals. Select this when connecting an
audio device without a built-in Dolby Digital
decoder.
[Dolby Digital]: Select this when connecting
an audio device with a built-in Dolby Digital
decoder.
x
[DTS]
[Downmix PCM]: Converts to output Linear
PCM signals. Select this when connecting to
an audio device without a built-in DTS
decoder.
[DTS]: Select this when connecting to an
audio device with a built-in DTS decoder.
x
[DTS Neo:6]
[Cinema]: Outputs simulated multichannel
sound from 2 channel sources via the HDMI
OUT jack according to the capability of the
connected device using DTS Neo:6 Cinema
mode.
[Music]: Outputs simulated multichannel
sound from 2 channel sources via the HDMI
OUT jack according to the capability of the
connected device using DTS Neo:6 Music
mode.
[Off]: Outputs sound with its original
number of channels via the HDMI OUT
jack.
x
[Audio DRC]
[Auto]: Performs playback at the dynamic
range specified by the disc (BD-ROM only).
Other discs are played back at the [On] level.
[On]: Performs playback at a standard
compression level.
[Off]: No compression works. A more
dynamic sound is produced.
x
[Downmix]
[Surround]: Outputs audio signals with
surround effects. Select this when
connecting an audio device that supports
Dolby Surround (Pro Logic) or DTS Neo:6.
[Stereo]: Outputs audio signals without
surround effects. Select this when
connecting an audio device that does not
support Dolby Surround (Pro Logic) or
DTS Neo:6.
x
[BD/DVD Menu]
Selects the default menu language for BD-
ROMs or DVD VIDEOs.
When you select [Select Language Code],
the display for entering the language code
appears. Enter the code for your language by
referring to “Language code list” (page 26).
x
[Audio]
Selects the default track language for BD-
ROMs or DVD VIDEOs.
When you select [Original], the language
given priority in the disc is selected.
When you select [Select Language Code],
the display for entering the language code
appears. Enter the code for your language by
referring to “Language code list” (page 26).
x
[Subtitle]
Selects the default subtitle language for BD-
ROMs or DVD VIDEOs.
When you select [Select Language Code],
the display for entering the language code
appears. Enter the code for your language by
referring to “Language code list” (page 26).
x
[BD Hybrid Disc Playback Layer]
[BD]: Plays BD layer.
[DVD/CD]: Plays DVD or CD layer.
x
[BD Internet Connection]
[Allow]: Normally select this.
[Do not allow]: Prohibits Internet
connection.
x
[Password]
Sets or changes the password for the Parental
Control function. A password allows you to
set a restriction on BD-ROM or DVD
VIDEO, and Internet video playback. If
necessary, you can differentiate the
restriction levels for BD-ROMs, DVD
VIDEOs, and Internet videos.