20
[Network Settings]
[Easy Setup]
[Resetting]
x
[Gracenote Settings]
[Auto]: Automatically downloads disc
information when disc playback stops.
Connect to the network for downloading.
[Manual]: Downloads the disc information
when [Playback History List] or
[Information Display] is selected in the
options menu.
x
[System Information]
Displays the player’s software version
information and the MAC address.
x
[Internet Settings]
Connect the player to the network
beforehand. For details, see “Connecting to
the Network” (page 12).
[View Network Status]: Displays the current
network status.
[Wired Setup]: Select this when you connect
to a broadband router using a LAN cable.
[USB Wireless Setup]: Select this when you
use a USB Wireless LAN Adapter.
z
For further details, visit the following
website and check the FAQ contents:
http://www.sony.com/bluraysupport/
x
[Network Connection Diagnostics]
You can run the network diagnostic to check
if the network connection has been made
properly.
x
[Media Remote Device Registration]
Registers your “Media Remote” device.
x
[Registered Media Remote Devices]
Displays a list of the registered your “Media
Remote” devices.
Re-runs the [Easy Setup] to make the basic
settings. Follow the on-screen instructions.
x
[Reset to Factory Default Settings]
You can reset the player settings to the
factory default by selecting the group of
settings. All the settings within the group
will be reset.
x
[Initialize Personal Information]
You can erase your personal information stored
in the player.
