16
[Pan & Scan]: Displays a full-height picture
on the entire screen, with trimmed sides.
x
[Cinema Conversion Mode]
[Auto]: Normally select this. The player
automatically detects whether the material is
video-based or film-based, and switches to
the appropriate conversion method.
[Video]: The conversion method suited for
video-based material will always be selected
regardless of the material.
x
[Output Video Format]
[HDMI]: Normally select [Auto]. Select
[Original Resolution] to output the resolution
recorded on the disc. When the resolution is
lower than the SD resolution, it is scaled up to
the SD resolution.
[
Video]
:
Automatically sets the lowest
resolution.
x
[BD/DVD-ROM 1080/24p Output]
[Auto]: Outputs 1920 × 1080p/24 Hz video
signals only when connecting a 1080/24p-
compatible TV using the HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 1080/24p video signals.
x
[YCbCr/RGB (HDMI)]
[Auto]: Automatically detects the connected
TV type, and switches to the matching colour
setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video
signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video
signals.
[RGB]: Outputs RGB video signals.
x
[HDMI Deep Colour Output]
[Auto]: Normally select this.
[16bit]/[12bit]/[10bit]: Outputs 16bit/12bit/
10bit video signals when the connected TV is
compatible with Deep Colour.
[Off]: Select this when the picture is unstable
or colours appear unnatural.
x
[Pause Mode]
[Auto]: Normally select this. Dynamic
moving pictures appear without blurring.
[Frame]: Displays static pictures at high
resolution.
[Audio Settings]
x
[Audio (HDMI)]
[Auto]: Normally select this. Outputs audio
signals according to the status of the
connected HDMI device.
[PCM]: Outputs PCM signals from the
HDMI OUT jack.
x
[BD Audio MIX Setting]
[On]: Outputs the audio obtained by mixing
the interactive and secondary audio to the
primary audio.
[Off]: Outputs the primary audio only. Select
this to output HD audio signals to an AV
amplifier (receiver).
x
[Dolby Digital]
[Downmix PCM]: Converts to output Linear
PCM signals. Select this when connecting an
audio device without a built-in Dolby Digital
decoder.
[Dolby Digital]: Select this when connecting
an audio device with a built-in Dolby Digital
decoder.
x
[DTS]
[Downmix PCM]: Converts to output Linear
PCM signals. Select this when connecting to
an audio device without a built-in DTS
decoder.
[DTS]: Select this when connecting to an
audio device with a built-in DTS decoder.
x
[DTS Neo:6]
[Cinema]: Outputs the simulated multi-
channel sound from 2 channel sources via the
HDMI OUT jack according to the capability
of the connected device using DTS Neo:6
Cinema mode.
[Music]: Outputs the simulated multi-
channel sound from 2 channel sources via the
HDMI OUT jack according to the capability
