Sony BDP-S190, Operating Instructions Manual

20

x

[Output Video Format]

[HDMI]: Normally select [Auto]. Select 
[Original Resolution] to output the 
resolution recorded on the disc. When 
the resolution is lower than the SD 
resolution, it is scaled up to the SD 
resolution.

[

Video]

: 

Automatically sets the lowest 

resolution.

x

[BD-ROM 24p Output]

[Auto]: Outputs 1920 × 1080p/24 Hz 
video signals only when connecting a 
1080/24p-compatible TV using the 
HDMI OUT jack.
[On]: Turns on the function.
[Off]: Select this when your TV is not 
compatible with 1080/24p video signals.

x

[DVD-ROM 24p Output]

[Auto]: Outputs 1920 × 1080p/24 Hz 
video signals only when connecting a 
1080/24p-compatible TV using the 
HDMI OUT jack.
[Off]: Select this when your TV is not 
compatible with 1080/24p video signals.

x

[YCbCr/RGB (HDMI)]

[Auto]: Automatically detects the 
connected TV type, and switches to the 
matching colour setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 
video signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 
video signals.
[RGB]: Outputs RGB video signals.

x

[HDMI Deep Colour Output]

[Auto]: Normally select this.
[16bit]/[12bit]/[10bit]: Outputs 16bit/
12bit/10bit video signals when the 
connected TV is compatible with Deep 
Colour.

[Off]: Select this when the picture is 
unstable or colours appear unnatural.

x

[Pause Mode]

[Auto]: Normally select this. Dynamic 
moving pictures appear without blurring.
[Frame]: Displays static pictures at high 
resolution.

[Audio Settings]

x

[Audio (HDMI)]

[Auto]: Normally select this. Outputs 
audio signals according to the status of 
the connected HDMI device.
[PCM]: Outputs PCM signals from the 
HDMI OUT jack.

x

[BD Audio MIX Setting]

[On]: Outputs the audio obtained by 
mixing the interactive and secondary 
audio to the primary audio.
[Off]: Outputs the primary audio only. 
Select this to output HD audio signals to 
an AV amplifier (receiver).

x

[Dolby Digital / DTS]

[Downmix PCM]: Converts to output 
Linear PCM signals. Select this when 
connecting an audio device without a 
built-in Dolby Digital or DTS decoder.
[Bitstream]: Select this when connecting 
an audio device with a built-in Dolby 
Digital or DTS decoder.

x

[DTS Neo:6]

[Cinema]/[Music]: Outputs the 
simulated multi-channel sound from 2 
channel sources via the HDMI OUT jack 
according to the capability of the