55
Set
tin
g
s and
Ad
ju
st
m
ent
s
Network Settings
These items are necessary when you connect
the player to the Internet. Enter the respective
(alphanumeric) values for your broadband
router or wireless LAN router.
The items that need to be set may differ,
depending on the Internet service provider or
the router. For details, refer to the instruction
manuals that have been provided by your
Internet service provider or supplied with the
router.
1
Select “Internet Settings” in “Network
Settings,” and press ENTER.
2
Select “Start,” and press ENTER.
3
Select the connected router type, and
press ENTER.
4
Select the configuration method of
wireless LAN, and press ENTER.
5
Check the following settings of your
wireless LAN router (access point).
– SSID (Service Set Identifier)
– Security type: For details on which
security can be used on this player, see
“About Wireless LAN Security” on
page 70.
– Security key: The wireless LAN router
(access point) has a WEP or WPA key
according to the selected security type.
• When you select “Access point scan” in
step 4, go to step 9 of “Setting wireless
LAN (Access point scan)” on page 31.
z
• WEP or WPA key may be displayed as
“passphrase” or “network key” depending on
the wireless LAN router (access point).
• The SSID of your wireless LAN router
(access point) is displayed in the wireless
network list on your PC. Check your
connected network SSID on page 24.
Internet Settings
Wireless
Select this when
connecting via a
wireless LAN router
(access point).
Wired
Select this when
connecting to a
broadband router
directly, and go to step
10.
Automatic
registration
(WPS)
When you connect the
player to a Wi-Fi
Protected Setup-
compatible wireless
LAN router (access
point) with security set,
select this and go to
step 7 of “Setting
wireless LAN
(Automatic registration
(WPS))” on page 30.
Access point
scan
Select this when you
connect the player to a
wireless LAN router
(access point) that is
Wi-Fi Protected Setup-
compatible without
security set or not Wi-
Fi Protected Setup-
compatible.
Manual
registration
Select this to make all
the settings manually.
,
continued