7-6
DNW-7/90/90WS
7-1-5. Cleaning of Tape Running System and Tape Cleaner
c
Tape cleaner has a sharp edge. Never touch the edge by bare hands. Take care during cleaning.
Tools Required
.
Cleaning cloth : 3-184-527-01
.
Cleaning fluid : 9-919-573-01
Procedures
1.
Clean the tape running surfaces (shaded portions) of the following guides using a cleaning cloth
moistened with a cleaning fluid as shown in the figure.
S1 guide, S2 guide, S3 guide, S4 guide, S5 guide, T1 guide, T2 guide, T3 guide, T4 guide, capstan
and pinch roller.
2.
After cleaning, be sure to clean it with a dry cleaning cloth two or three times.
3.
Pass a piece of paper approximately this manual’s paper thin through the clearance of the tape cleaner
from top to bottom four or five times.
At this time, do not move the paper from bottom to top.
c
Never touch the edge portion of the tape cleaner by bare hands.
7-1. Cleaning
Tape cleaner
S5 tape guide
S3 tape guide
S4 tape guide
S1 tape guide
T1 tape guide
T2 tape guide
S2 tape guide
Pinch roller
Capstan
T3 tape guide
T4 tape guide
