Sony Betacam SX DNW-A65 Operation Manual Download

Page: 20 / 82

2-1 Control Panels

Chapter 2

Location and Function of Parts

2-12

Chapter 2

Location and Function of Parts

PROCESS CONTROL switch

This selects the method of control of the internal
digital video processor.

REMOTE: Select this position to use an optional

BVR-50/50P Remote Control Unit for remote
control of the internal digital video processor.

MENU: Select this position to use setup menus to

change the settings for the internal digital video
processor.

LOCAL: Select this position to use the subsidiary

control panel to change the settings for the internal
digital video processor.

VIDEO knob and PRESET/MANUAL switch

The switch makes the selection described immediately
below. When it is set to MANUAL, you can use the
knob to adjust the video signal output level.

PRESET: Regardless of the position of the knob, the

video signal output level is set to the reference
value.

MANUAL: You can adjust the video signal output

level in the range ±3 dB.
You can change the adjustment range using
extended menu item 714.

CHROMA (chrominance) knob and PRESET/

MANUAL switch
The switch makes the selection described immediately
below. When it is set to MANUAL, you can use the
knob to adjust the chrominance signal output level.

PRESET: Regardless of the position of the knob, the

chrominance signal output level is set to the
reference value.

MANUAL: You can adjust the chrominance signal

output level in the range ±3 dB.
You can change the adjustment range using
extended menu item 714.

SET UP (DNW-A65)/BLACK LEVEL (DNW-

A65P) knob and PRESET/MANUAL switch
The switch makes the selection described immediately
below. When it is set to MANUAL, you can use the
knob to adjust the (black) setup level (525/60 system)
or black level (625/50 system).

PRESET: Regardless of the position of the knob, the

setup level (525/60 system) or black level (625/50
system) is set to the reference value.

MANUAL: You can adjust the setup level (525/60

system) in the range ±30 IRE

, or the black level

(625/50 system) in the range ±210 mV.

Y/C DELAY knob and PRESET/MANUAL

switch
The switch is effective only for playback of video
recorded in Betacam or Betacam SP format. It makes
the selection described immediately below. When it is
set to MANUAL, you can use the knob to adjust the
Y/C delay.

PRESET: Regardless of the position of the knob, the

Y/C delay is set to the reference value.

MANUAL: You can adjust the Y/C delay in the

range ±100 ns.

CHROMA (chrominance) PHASE knob and

PRESET/MANUAL switch
The switch makes the selection described immediately
below. When it is set to MANUAL, you can use the
knob to adjust the chrominance phase (the phase
difference from a burst signal).

PRESET: Regardless of the position of the knob, the

chrominance phase is set to the reference value.

MANUAL: You can adjust the chrominance phase in

the range ±30˚.

!º

SYNC knob

This adjusts the output signal sync phase with respect
to the input reference signal to this unit, in a range of
±15

Use this adjustment when the output phase of this unit
is not accurately aligned with the reference signal
phase, or when carrying out special effects editing with
this unit and other VTRs connected to a switcher or
other equipment.

1) IRE: A unit for representing a video level laid down by

the IRE (Institute of Radio Engineers). The IRE is now
the IEEE (Institute of Electrical and Electronic
Engineers).

..........................................................................................................................................................................................................