Sony Betacam SX DNW-A65 Operation Manual Download

Page: 62 / 82

Chapter 6

Menu System

6-12

Chapter 6

Menu System

6-3 Extended Menu

Menu items in the 300s, relating to editing operations

Item number

Item name

Settings

301

VAR SPEED RANGE FOR
SYNCHRONIZATION

Select the playback speed range when carrying out playback in variable mode
from a remote control unit connected to the REMOTE-1 IN (9P) connector or
REMOTE-1 OUT (9P) connector.
–1~+2 : For a digital tape, from –1 to +2 times normal speed; for an analog tape,

from –1 to +3 times normal speed.

~+2.3 : For a digital tape, from –1.5 to +2.3 times normal speed; for an analog

tape, from –1.5 to +3.45 times normal speed.

WIDE: Undefined.

302

CAPSTAN RE-LOCKING
DIRECTION

In 525 mode
When the CAPSTAN LOCK switch on the subsidiary control panel is set to 4FD
select whether the capstan servo should lock by accelerating or decelerating.
DECEL : Lock by decelerating.
ACCEL: Lock by accelerating.

In 625 mode
When the CAPSTAN LOCK switch on the subsidiary control panel is set to 4FD
or 8FD select whether the capstan servo should lock by accelerating or
decelerating.
DECEL: Lock by decelerating.
ACCEL : Lock by accelerating.

307

AUTO-DELETION FOR
INCONSISTENT DATA

Select what happens when an erroneous DMC playback control point is set.
MANU : A warning is given by flashing the DELETE button on the lower control

panel.
The operator must manually delete the unnecessary DMC playback control
points or correct the erroneous DMC playback control point.

NEG&E: When inconsistent DMC playback control points are set, such as a

speed variation end point is before a speed variation start point, or an on-air
end point is before an on-air start point, or when too many DMC playback
control points are specified, the previously set DMC playback control point is
deleted.

NEG: When inconsistent DMC playback control points are set, such as a speed

variation end point is before a speed variation start point, or an on-air end point
is before an on-air start point, the previously set DMC playback control point is
deleted. When too many DMC playback control points are specified, the
DELETE button on the control panel flashes to give a warning.

Note

Pressing the button corresponding to a DMC playback control point to be deleted
and the DELETE button simultaneously, deletes the DMC playback control point.
If an erroneous DMC playback control point is set (the DELETE button is
flashing), DMC playback is not executed.

306

DMC INITIAL SPEED

Select the initial speed automatically set when carrying out DMC playback.
MANUAL : The speed determined by the rotation of the search dial.
PLAY: Normal playback speed.
STILL: Stationary.
±0.03~±1, +2: Speed set in the range ±0.03 to +2 (select from +2, ±1, ±0.5, ±0.2,

±0.1, ±0.03).

320

DIGITAL AUDIO
PROCESS ON EDIT
POINT

Select the treatment of audio at edit points.
CUT: Carry out a cut (possibly resulting in audio discontinuities at the edit point).
FADE : Fade out and fade in.