1-37
FVS-1000 MMP1
35S Pad assembly
Reference hole
Holes of the pad arm
Pad driving pins
Pad positioning shafts
One-touch screws
(3) 16S/16T Pad Assembly Replacement
n
The pad assembly is adjusted for every FVS-1000.
Do not install the pad assembly which was adjusted with other FVS-1000.
When installing the pad assembly which is using with other FVS-1000, it is necessary to perform the
pad roller clearance adjustment. (As for the detailed installing procedures, refer to Section 3-4-5.)
Rotate the two one-touch screws in counterclockwise direction by hand, and then replace the 35S/35T
pad assembly with 16S/16T pad assembly. (Refer to Section 4-2 “Replacing the Pad Assembly” for
details.)
1-11. Installation of Optional Units