Note about using the BKM-20D/21D/41HD/42HD
When installing the input adaptor in an input option
slot on the rear of the monitor, or fitting a cover plate
to an unused slot, always do such operation in order
from the rightmost slot, as shown in Figure 1. If a
BKM-20D/21D/41HD/42HD is already installed, first
of all remove it and then do the installing operation in
order from the rightmost slot.
When removing a BKM-20D/21D/41HD/42HD,
always loosen all input adaptor screws and then
remove in order from the rightmost slot, as shown in
Figure 2.
Figure 1
When one of the input option slots on the rear of the
monitor has a BKM-20D/21D/41HD/42HD (optional)
installed, if the slot to the right has another adaptor or
the analog input connectors board, or a cover plate
fitted, as shown in Figure 3, the radiation shield of the
BKM-20D/21D/41HD/42HD may be damaged or
detached (see Figure 4). Using the BKM-20D/21D/
41HD/42HD with the radiation shield damaged or
detached may result in electromagnetic interference.
Always use care about the radiation shield.
BKM-20D/21D/
41HD/42HD
Input adaptor
Cover plate
Input option slots
Analog input connectors board
Radiation shield
Input adator, etc.
Figure 3
Figure 4
Figure 2
