1-4
BKM-B30NW
6
(GB)
Location and Function of Parts and Controls
Y/C
COMPOSITE
VIDEO IN
1
VIDEO IN connector
Y/C connector (mini DIN 4-pin): Connects to the Y/
C video output of the video equipment.
COMPOSITE connector (phono jack) : Connects to
the composite video output connector of the video
equipment.
2
PC CARD slot
The recommended LAN PC card or memory card can
be attached according to your requirements.
3
Ether connector (10/100BASE-T)
Connect to a computer on the same LAN with the
LAN cable when you use the networking function of
the Display (Network Adaptor).
4
Keyboard connector (for USB keyboard)
Connect a keyboard,
Notes
• You cannot connect equipment other than the
keyboard to this connector.
• Connect the keyboard before the power of the
Display is turned on.
5
Mouse connector (for USB mouse)
Connect the mouse.
Notes
• You cannot connect equipment other than the mouse
to this connector.
• Connect the mouse before the power of the Display is
turned on.
1
2
3
4
5
7
(GB)
You can connect to the LAN with the LAN cable (10/
100BASE-T) or wireless LAN by attaching the
wireless LAN PC card. You can also use the memory
card.
This section describes the tasks that are required for
using the networking function of the Display (Network
Adaptor).
System Configuration
Attaching the PC card
When you connect the Display (Network Adaptor) to
the wireless LAN, attach the wireless LAN PC card to
the PC CARD slot of the Network Adaptor.
To remove the PC card from the slot, press the eject
button.
Preparations for Using the Networking Function
Insert the card with the
arrow mark facing
toward the slot.
PC card
Connecting to LAN using the LAN cables
The eject button pops out
when inserting.
LAN cable
LAN cable
LAN
cable
LAN cable
Computer
Computer
Computer
to
Hub/router
ETHER
connector
Display (Network Adaptor)
Preparation