3-3 (E)
BKP-5090
3-1-1. Operation Menu
This menu contains items contained for changing camera settings to suit shooting conditions during
normal camera operations.
(Boxed items under “Settings” indicate the factory setting.)
Page
Ver.
Item
Settings
Contents
VF Display
Zoom
[On]
, Off
Turns on and off the indications of zoom position and lens extender.
SHUTT
[On]
, Off
Turns on and off the indications of shutter speed and mode.
Iris
[On]
, Off
Turns the iris setting indication on and off.
Audio
[On]
, Off
Turns the audio level indication on and off.
(Automatically turned OFF in connection with CCU/RCP)
Tape
[On]
, Off
Turns the tape-remaining indication on and off.
(Automatically turned OFF in connection with CCU/RCP)
Zebra
On, Off
Turns the zebra indication on and off. (Corresponds to the Zebra switch
of VF connected to the camera.)
Message
[On]
, Off
Turns on and off the indication of message in changing each setting of
filter, white balance memory, gain value, DCC(auto knee) and shutter
speed.
The indication is displayed within three seconds in the center of the
viewfinder screen.
Mode
CHG,
[USR]
CHG : The indications of the optical filter, white balance memory and
gain value are displayed only when they differ from the standard
settings (FILTER:1B, WHITE:A, GAIN:0dB)
USR : The indications are displayed corresponding to the settings on
the VF Display page.
Filter
*
,
[On]
, Off
Turns the optical filter indication on and off.
White
*
,
[On]
, Off
Turns the white balance memory indication on and off.
Gain
*
,
[On]
, Off
Turns the gain value indication on and off.
Marker
Center
[On]
, Off
Turns the center marker indication on and off.
Safety Zone
80%, 90% , Off
Turns the safety zone marker indication on and off and selects the area
indicated by that marker.
a)
Box Cursor
On,
[Off]
Turns the box cursor indication on and off.
Box H POS
_
99 to 99 (
[0]
)
Shifts horizontally the location of the box cursor on the screen.
Box V POS
_
99 to 99 (
[0]
)
Shifts vertically the location of the box cursor on the screen.
Box WIDTH
00 to 99 (
[41]
)
Sets the width of the box cursor.
Box Hight
00 to 99 (
[10]
)
Sets the height of the box cursor.
3-1. Setup Menu (BVP-550 series)
3-1-1. Operation Menu
