12(E)
Menu Settings
Adjusting the white balance <White>
Select White in the Paint menu, then set the white
balance by individually adjusting the white level of the
R, G, and B signals.
Use the controls in the multi-function setting section to
adjust the white balance.
To turn on or off the auto tracking white balance
adjustment function
Move the arrow (
t
) to ATW, change the arrow to ?,
and turn the left-hand control in the multi-function
setting section to turn it on or off.
Adjusting the black balance <Black>
Select Black in the Paint menu, then set the black
balance by individually adjusting the black level of the
R, G, and B signals.
Use the controls in the multi-function setting section to
adjust the black balance.
Adjusting the flare <Flare>
Select Flare in the Paint menu. You can then turn on or
off the flare function or individually adjust the flare
level of the R, G, and B signals.
To turn on or off the flare function
Move the arrow (
t
) to ON (or OFF) on the upper
column, change the arrow to ?, and turn the left-hand
control in the multi-function setting section to turn it
on or off.
To adjust the flare
Move the arrow (
t
) to the numeric value on the
lower column, change the arrow to ?, and turn the three
controls in the multi-function setting section to adjust
the R, G, and B signals individually.
Adjusting the gamma level <Gamma>
Select Gamma in the Paint menu. You can then adjust
the master gamma and the gamma level for the R, G,
and B signals individually.
To change the gamma curb table
Move the arrow (
t
) to the upper column, change the
arrow to ?, and turn the right-hand control in the multi-
function setting section to select the gamma curb table.
<White>
[R] [G] [B]
White : -99 0 99
c
ATW : OFF
<Black>
[R] [G] [B]
c
-99 0 99
<Flare>
[R] [G] [B]
c
-99 0 99
ON
<Gamma>
[STEP] [M]
[Mode] [Table]
ON 0.45 99
STD 1
[R] [G] [B]
c
-99 0 99
