1-14 (E)
BKPF-R70
1-11. ISR (Interactive Status Reporting)
This board has its own ISR interface function. The following messages are sent to the ISR system,
permitting the operating status of the BKPF-R70 to be monitored without BKPF-500 ISR Interface Board.
The ISR function is controlled by Sony application program software. For the program software, usage,
installation, and operation of a personal computer in which this program software can be used, consult
with your local Sony’s sales/service office.
n
BKPF-500 is necessary to monitor the operating status of the power supply units of the interface unit
(PFV series) and the boards except BKPF-R70.
Connection
1.
Connect a personal computer to the RS-232C connector (REMOTE 3, D-sub 9-pin) with an
RS-232C cross cable.
2.
Install the ISR application program software to the personal computer.
3.
Set the personal computer as follows:
Setting Item
Setting
Speed
9600 bps
Start Bit
1
Data Bits
7
Parity Bit
ODD
Stop Bit
1
4.
Set S2-3 on the CPU-256 board to ON.
Status message
Message
Description
BACKUP CPU DOWN
The backup CPU is shut down.
S-BUS LINK DISCONNECTED
The S-BUS remote cable has opens.
1-11. ISR (Interactive Status Reporting)
Summary of Contents for BKPF-R70
Page 4: ......
