Sony BKSM-R103, Installation Manual

2-2 (E)

BKSM-R103

1. Installation of Board

(1) Match the hole on the APR-31 board with the ejector

pin on the DEC board of the DSM-R1/D1.

(2) Connect the connector on the APR-31 board to the

connector on the DEC board.

n

Make sure that the connector is connected tightly.

(3) Secure the APR-31 board using the four screws (PWH

3

x

6) supplied with the BKSM-R103.

2. Installation of Rear Panel Assembly

(1) Remove the four screws, and remove the blank panel

from the DSM-R1/D1.

n

Keep the removed blank panel and screws.

(2) Secure the ANALOG OUT rear panel using the four

screws (B 3

x

6) supplied with the BKSM-R103.

n

The BKSM-R103 comes with the two varieties of the
ANALOG OUT rear panel assembly.  Use either of the
two panels for your purpose.

.

Rear panel with 3-pin XLR connectors :

Enables 2-channel audio output.

.

Rear panel with 5-pin XLR connectors :

Enables 4-channel audio output.

2-1. Installation of Board and Rear Panel

APR-31 board 

DEC board

Hole

Ejector pin

Connector

Connector

APR-31 board

Ejector lever

DEC board

PWH 3

x

6

PWH 3

x

6

Blank panel

B 3

x

6

ANALOG OUT
rear panel assembly

B 3

x

6