Sony BKSM-R103, Installation Manual

2-4 (E)

BKSM-R103

.

When the rear panel with 5-pin XLR connectors is used :

(1) Connect the coaxial cable to the BNC connector.
(2) Route the coaxial cable as shown in the figure.
(3) Connect the coaxial cable to CN600 (A-3) on the APR-31 board.
(4) Connect the harness (white) to CN1 on the CP-333 board, and the harness (red) to CN2.
(5) Route the harnesses as shown in the figure.
(6) Connect the harness (white) to CN900 (A-7) on the APR-31 board, and the harness (red) to

CN1000(A-6).

<Connection>
Coaxial cable

: BNC connector

_

CN600/APR-31 board

Harness (white) : CN1/CP-333 board

_

CN900/APR-31 board

Harness (red)

: CN2/CP-333 board

_

CN1000/APR-31 board

n

There is no necessity to perform the check/adjustment after the APR-31 board and the ANALOG OUT
rear panel installing.

2-1. Installation of Board and Rear Panel

CN900 (white)

CN600

CN900 (white)

CN600

APR-31 board

APR-31 board

CP-333 board

CN2 (red)

BNC connector

CN1000 (red)

CN1000 (red)

CP-333 board

CN1 (white)

CN2 (red)

BNC connector

CN1 (white)

Harness clamper

1

 : When the board is installed in “1” side

2

 : When the board is installed in “2” side

1

2

1

2