Sony BKSM-T103, Installation Manual

1-1 (E)

BKSM-T103

The BKSM-T103 is the board which converts the input analog composite video and analog audio signals,
and inputs these converted signals to the encoder board of the DSM-T1/M1.
In the BKSM-T103, the analog composite video signal is converted analog to digital, compressed, then
input this compressed signal to the encoder board of the DSM-T1/M1 as a video data.
Similarly, the analog audio signal is converted analog to digital, then input this converted signal to the
encoder board as an audio data.

The BKSM-T103 can be installed in the following units.

.

DSM-T1 Digital Satellite Modulator

.

DSM-M1 SDTI Multiplexer

The BKSM-T103 consists of the following components.

.

APR-30 board

: 1 pc.

.

ANALOG IN rear panel assembly (with 3-pin XLR connectors) 

*

1

: 1 pc.

.

ANALOG IN rear panel assembly (with 5-pin XLR connectors) 

*

1

: 1 pc.

.

Coaxial cable

: 1 pc.

.

Harness (with white connectors)

: 1 pc.

.

Harness (with red connectors) 

*

2

: 1 pc.

.

Screw for board installing (PWH 3

x

6)

: 4 pcs.

.

Screw for rear panel installing (B 3

x

6)

: 4 pcs.

*

1

: Use either of the two panels for your purpose.

.

Rear panel with 3-pin XLR connectors : Enables 2-channel audio input.

.

Rear panel with 5-pin XLR connectors : Enables 4-channel audio input.

*

2

: When the rear panel with 3-pin XLR connectors is used, this harness is not used.

Section 1

Overview