background image

7

GB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Parts and Controls

 

 (Power) / + / –

When the TV is off,

Press 

 to power on.

When the TV is on,

Press and hold 

 to power off.

Press 

 repeatedly to change the function, 

then press + or – button to:
• Adjust  the  volume.
• Select the channel.
• Select the input source of TV.

Remote Control sensor*

1

 / 

 

Light sensor*

1

 / Illumination LED

The illumination LED lights up or blinks 
according to the status of the TV. 
For more information, refer to the Help 
Guide.

Built-in MIC*

2

*

3

Use the hands-free built-in microphone for 
Voice Search. To enable the built-in MIC, 
press 

HOME

, then select [Settings] 

 

[Google].

Built-in MIC LED

The built-in MIC LED lights up in amber 
when the built-in MIC is enabled. The built-
in MIC LED can be disabled.*

3

*1 Do not place anything near the sensor.

*2 The built-in MIC will be available when software is 

updated. For the latest information, visit Sony 
support website (information provided on the back 
cover). 

 

The Voice Search requires an Internet connection. 

 

The Voice Search with the built-in MIC is available 
only on limited region/country/language. 

 

Standby power consumption will increase because 
the built-in MIC is always listening when the Voice 
Search with the built-in MIC is enabled.

*3 For more information, see the Online Help Guide 

(page 2).

Controls and Indicators

ȫȬ

Ȫ

Summary of Contents for BRAVIA KD-55A9F





























Reviews: