C:\Users\user\Desktop\SONY
TV\SY20_NR_UC2_RG_111\5013501111\01US\FY20\Map\NR\5013501111_US.fm
master page: Right
KD-65X75CH / 55X75CH
5-013-501-
11
(1)
7
US
Installing the TV to the Wall
This TV’s instruction manual only provides
the steps to prepare the TV for Wall-Mount
installation before it is installed on the wall.
Your TV can be mounted to a wall using a
suitable Wall-Mount Bracket (not supplied).
If the Table-Top Stand is attached to the TV,
the TV may require detaching the Table-Top
Stand; see “Detaching the Table-Top Stand
from the TV”.
Prepare the TV for the Wall-Mount Bracket
before making cable connections.
For product protection and safety
reasons, Sony strongly recommends that
installation of your TV on the wall be
performed by qualified professionals. Do
not attempt to install it yourself.
• Follow the instruction guide provided
with the Wall-Mount Bracket for your
model. Sufficient expertise is required in
installing this TV, especially to determine
the strength of the wall for withstanding
the TV’s weight.
• The screws for Wall-Mount Bracket are
not supplied.
• The length of the screw for Wall-Mount
Bracket differs depending on the
Wall-Mount Bracket thickness. Please
refer to below illustration.
• Refer to the following table for
wall-mount hole pattern.
• Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.
Note
• Read the supplied Safety Booklet for additional
safety information.
KD-65X75CH
Remove the screws from the rear of the
TV.
Attach the Wall-Mount Bracket (not
supplied) using the screws (not
supplied).
KD-65X75CH
Model Name
Wall-mount hole
pattern
×
KD-65X75CH
300 × 300 mm
KD-55X75CH
200 × 200 mm
Screw (M6)
8 mm – 12 mm
Wall-Mount Bracket
TV’s rear cover
Screw
Wall-Mount Bracket
US
