Getting Started
22
Setting Up the Channel List - Initial Setup
After you finish connecting your TV, you need to run
Initial Setup
, which
automatically sets up available channels. The
Initial Setup
screen appears
when you turn on your TV for the first time. If you do not want to set up the
channels at this time, you can do it later by selecting the
Auto Program
option in the
Channel
settings (see page 31).
1
Press
to turn on the TV.
The
Initial Setup
screen appears.
2
Press
V
/
v
to highlight the desired
language and
to select.
3
The message “First please connect
cable or antenna. Allow 50+ minutes
for completion.” and “Start auto
program now?” appear, make sure you
already connected cable or antenna,
then select
OK
to start
Auto Program
.
If you want to start
Auto Program
later, select
Cancel
.
4
The scanning of channels will start. If
you want to stop and run
Auto
Program
later, press
to cancel.
5
When
Auto Program
is complete,
press
to continue.
6
If the
Initial Setup
programming
found cable channels, you will be able
to scan antenna channels as well.
Connect the antenna using an A-B RF
switch (not supplied) and change the
switch to antenna then start
Auto
Program
to search antenna channels.
If the
Initial Setup
programming found antenna channels, the
Auto
Program
process will finish. If you want to scan cable channels, you
can do it later using the
Channel
settings.
To run Auto Program again at a later time
❑
Use the
Auto Program
feature as described on page 31.
To display the Picture in your Preferred Aspect Ratio
❑
Select the proper
Wide Mode
as described on pages 24 and 29.
If you have cable and antenna available, please connect cable first.
Please select your language:
Initial Setup
English
Español
Français
Initial Setup
First please connect cable or antenna.
Allow 50+ minutes for completion.
Start auto program now?
OK
Cancel
POWER
Initial Setup
Analog Channels Found: 0
Digital Channels Found: 0
Cancel
Searching...
Please wait. Allow 50+ minutes for completion.
Press to cancel.
Initial Setup
If you want to use air signals,
please connect antenna.
Allow 50+ minutes for completion.
OK
Cancel
