7
GB
Start-up Guide
4
Press
F
/
f
to select the country/region in
which you will operate the TV, then press
.
If the country/region which you want to use on
the TV does not appear in the list, select “-”
instead of a country/region.
5
Press
F
/
f
to select the location type in
which you will operate the TV, then
press .
In Shop mode, some settings will be periodically
reset for Shop usage.
This option selects the initial picture mode
appropriate for the typical lighting condition in
these environments.
7: Auto-tuning the TV
1
Press .
2
Press
F
/
f
to select “Antenna” or
“Cable
*
”, then press
.
If you select “Cable*”, the screen for selecting
the scan type appears. See “To tune the TV for
Cable connection” (page 8).
The TV starts searching for all available digital
channels, followed by all available analogue
channels. This may take some time, so do not
press any buttons on the TV or remote while
proceeding.
If a message appears for you to confirm the
aerial connection
No digital or analogue channels were found.
Check all the aerial/cable* connections and
press to start auto-tuning again.
* Except for KDL-40/37/32P36xx.
3
When the Programme Sorting menu
appears on the screen, follow the steps of
“Programme Sorting” (page 25).
If you do not change the order in which the
analogue channels are stored on the TV, press
MENU to go to next step.
~
• This step will not appear if any analogue channel is
found.
Select:
Back:
Confirm:
Language
Country
Location
-
United Kingdom
Ireland
Nederland
België/Belgique
Luxembourg
France
Italia
Auto Start-up
Language
Country
Location
Home
Shop
Select:
Back:
Confirm:
Auto Start-up
Back:
Start:
Do you want to start Auto Tuning?
Auto Tuning
Continued