44
Using the Channel Settings
• You should run
Auto Program
after changing the
Signal Type
setting.
• Running
Auto Program
will clear the
Favorites
list.
• Channels that you set to be hidden can be accessed by the
0-9
and
buttons.
• You can set channels to be hidden that are automatically set in
Auto Program
.
Option
Description
Signal Type
Cable
Select if you are receiving cable channels via Cable TV
provider.
Antenna
Select if you are using an antenna.
Auto Program
Automatically sets up the channel list on the TV for all receivable channels.
1
Select
Auto Program
.
2
Select
OK
to start
Auto Program
.
Add Digital
Channels
1
Select
Add Digital Channels
.
2
Select
OK
to add digital channels.
Show/Hide
Channels
Allows you to show or hide channels that appear when you use the
CH +/–
buttons.
1
Press
V
/
v
to scroll through the channels until you find the channel you
want to show or hide. Then press
to select it.
2
Press
V
/
v
to determine if the channel will be shown or hidden. Then press
to select it.
Edit Channel
Labels
Allows you to assign labels (such as station call letters) to channel numbers.
1
Press
V
/
v
to scroll through the channel numbers. Then press
to
select the channel number that you want to assign a label.
2
Press
V
/
v
to scroll through the label characters (A-Z, 0-9, etc.). Press
b
to
move to the next character. Repeat the previous steps to add up to seven
characters to the label. When finished, press
.
Analog Fine
Tune
Allows you to fine-tune the selected analog channel manually if you feel that a
slight tuning adjustment may improve picture quality. Select
Auto
to adjust to
the most appropriate analog channel.
Summary of Contents for Bravia KDL-32EX340
Page 75: ......
