KDL-32/40EX720,721,723,724(AEP/UK)
50
ADJUSTMENT
3) Write data for
“Digital”
service mode. (
“002 MODEL”
category)
Note: This procedure operation, when replaced the B board.
Note: Do not write a wrong segment or destination information in Product ID.
When the wrong setting is written, TV may not operate.
000 SEG -----------------Select JDM code information
001 DEST ---------------Select destination information
002 MODELNAME ---Select model name
004 SERIAL ------------ Can be set only once for the new board
a. Change data for each model.
b. Press “Mute”, “0” on remote sequentially.
It shows red “
WRITE
”. It indicate writing is processing.
c. After a while. Red “WRITE” disappears. Writing process is done after a while.
DIGITAL
SERVICE
002
MODEL
000
SEG
I
‐
1
Write
