18
GB
Clock/Timers
Sets the timer and clock.
Sleep Timer:
Sets the time in minutes
that you would like the TV to remain
on before shutting off automatically.
On Timer:
Turns on the TV from
standby mode at a time you set, and
tuned to a channel or input of your
preference. Before setting this
function, make sure you set the
correct current time.
Current Time:
Sets the current time and
date.
Date
Set current date.
Time
Set Current Time.
Auto Startup
Starts the initial set-up procedure. This
option allows you to retune the TV after
moving houses, or to search for new
channels that have been launched by
broadcasters.
Language
Select the language in which the menus
are displayed.
Startup Logo
Select [On] to display the logo when the
TV is turned on. Select [Off] to disable it.
LED Indicator
Select [On] to light up the LED indicator.
Select [Off] to disable it.
AV Setup
Manage Inputs:
Assigns name to
external equipment input.
Enable:
Select [Auto] to display names
only when the equipment is connected,
or [Always] to display regardless of
connection status.
Label Inputs:
Uses one of the preset
labels to assign a name to connected
equipment. Select [Edit] to creates your
own label.
Color System:
Selects the colour
system according to the composite
video signal from the input source.
Video/Component Selection:
Select
[Auto] to have the TV detect and
switch between the component
video jack
or the video jack
when component video jack
or
video jack
is connected.
Note
• You cannot use the component video jack
and the video jack at the same time.
Speakers:
Select sound output from
the TV speakers or external audio
equipment.
Headphone/Audio Out:
Sets the sound
output to headphone, external audio
systems or Active Subwoofer
connected to the TV. Disconnect
headphone from the TV when you
select [Audio Out] or [Subwoofer].
Headphone Speaker Link:
Switches the
TV’s internal speakers on/off when
you connect headphone to the TV.
Headphone Volume:
Adjusts the
volume of the headphone.
Note
• This option is not available, when
[Headphone/Audio Out] is set to [Audio
Out] or [Subwoofer].
Audio Out:
Variable:
When using an external
audio system, volume output from
audio out can be controlled using the
TV’s remote control.
Fixed:
The audio output of the TV is
fixed. Use your audio receiver’s
volume control to adjust the volume
(and other audio settings) through
your audio system.
Hint
• This option is only available when
[Headphone/Audio Out] is set to [Audio
Out].
Digital Audio Out:
Sets the audio signal
that is output by connecting using
digital audio output (optical) cable or
HDMI cable. Set to [Auto], when
connecting equipment compatible
with Dolby Digital or DTS. Set to
[PCM], when connecting equipment
not compatible with Dolby Digital or
DTS.
