26
GB
C:\Users\fle1\Desktop\FULLSET\SY160215_KM KL4349 PAD
IM\4685033121_GB\060NHM.fm
masterpage: Left
KDL-49W750E / 49W660E / 43W750E / 40W660E / 32W660E / 32W610E
4-685-033-
12
(1)
AV Set-up
Video Labels:
Assigns name to external
equipment input.
Enable:
Select [Auto] to display names
only when the equipment is connected,
or [Always] to display regardless of
connection status.
Label Inputs:
Uses one of the preset
labels to assign a name to connected
equipment. Select [Edit] to creates your
own label.
Colour System:
Selects the colour
system according to the composite
video signal from the input source.
Speakers:
Select sound output from
the TV speakers or external audio
equipment.
Headphone/Audio Out:
Sets the sound
output to headphone, external audio
systems or Active Subwoofer
connected to the TV. Disconnect
headphone from the TV when you
select [Audio out (Fixed)], [Audio out
(Variable)] or [Subwoofer].
Audio out (Fixed)
The audio output of the TV is fixed. Use
your audio receiver’s volume control to
adjust the volume (and other audio
settings) through your audio system.
Audio out (Variable)
When using an external audio system,
volume output from audio out can be
controlled using the TV’s remote
control.
Headphone Speaker Link:
Switches the
TV’s internal speakers on/off when
you connect headphone to the TV.
Headphone Volume:
Adjusts the
volume of the headphone.
Note
• This option is not available, when
[Headphone/Audio Out] is set to [Audio out
(Fixed)], [Audio out (Variable)] or
[Subwoofer].
Subwoofer:
To enable, set
[Headphone/Audio Out] to
[Subwoofer].
Subwoofer Level
Adjust subwoofer volume level.
Phase
Select the phase polarity.
Subwoofer Sync
Adjusts the time lag of Subwoofer
sound.
Digital Audio Out:
Sets the audio signal
that is output by connecting using
digital audio output (optical)* cable
or HDMI cable.
* Only on limited region/country/TV model
Auto 1
Output compressed audio without
change.
Auto 2
Output only compressed audio for
multichannel content without change.
PCM
Always output in PCM.
TV Position:
Improves the speaker
settings when set as [Table-Top
Stand] or [Wall Mount] according to
your TV’s position.
HDMI signal format (Only on limited
region/country/TV model):
Standard format
Standard HDMI format for normal use.
Enhanced format
Set only when using devices supporting
HDMI 2K HDR (High Dynamic Range)
format.
Note
• HDMI IN 1 and HDMI IN 2 signal format
changes at the same time.
• Change to [Standard format] if the picture
and sound do not output correctly in
[Enhanced format].
• Some contents may not be displayed as 2K
HDR when 4K HDR contents playback from a
source device.
