30
GB
Settings
See the “Picture” setting for monitor (page 39).
See the “Sound” setting for monitor (page 41).
Picture
Sound
Features
Quick Start
The unit turns on faster than usual within two hours after switching to standby
mode. However, power consumption in standby mode is 38 watt higher than usual.
Timer Settings
Sets the timer to turn on/off the unit.
Sleep Timer
Sets a period of time after which the unit automatically
switches itself into standby mode.
When the “Sleep Timer” is activated, the (Timer) indicator
on the monitor (front panel) lights up in orange.
z
• If you turn off the unit and turn it on again or switch to the
monitor mode from the media receiver mode, “Sleep
Timer” is reset to “Off”.
• A notification message appears on the screen one minute
before the unit switches to standby mode.
On Timer
Settings
On Timer
Sets the timer to turn on the unit from
standby mode.
Timer Mode
Sets the desired day(s) of the week you
want the timer to turn on the unit.
Time
Sets the time to turn on the unit.
Duration
Sets how long you want the unit to stay
on before switching to standby mode
again.
z
• If you switch to the monitor mode from the media receiver
mode, “Duration” is cancelled.
Time Adjustment
When digital channels have been received, set this to “Auto”
to adjust the clock automatically. If no digital channels have
been received, set this to “Manual”, and adjust the clock
manually in “Clock Set”.
Clock Set
Allows you to adjust the clock manually.
