20
GB
KDL-46/40T35xx
2-697-124-12(1)
Picture menu
You can select the options listed below on the Picture
menu.
1
Press
F
/
f
to select “Settings” on MENU,
then press
.
2
Press
F
/
f
to select a menu icon, then
press .
3
Press
F
/
f
/
G
/
g
to select an option.
Target Inputs
Selects whether to apply settings made in the Picture menu to all inputs, or only to
the input currently being watched.
“All”: Applies settings to all inputs.
“Viewing Only”: Applies settings only to the current input.
Picture Mode
Selects the picture mode except for PC input source.
“Vivid”: For enhanced picture contrast and sharpness.
“Standard”: For standard picture. Recommended for home entertainment.
“Custom”: Allows you to store your preferred settings.
Display Mode
Selects the display mode for PC input souce.
“Video”: For video images.
“Text”: For text, charts or tables.
Reset
Resets all picture settings except “Target Inputs”, “Picture Mode” and ”Display
Mode” to the factory settings.
Backlight
Adjusts the brightness of the backlight.
Tip
“Backlight” is not available when you set “Power Saving” to “High” (page 26).
Contrast
Increases or decreases picture contrast.
Brightness
Brightens or darkens the picture.
Colour
Increases or decreases colour intensity.
Hue
Increases or decreases the green tones and red tones.
Tip
“Hue” can only be adjusted for an NTSC colour signal (e.g., U.S.A. video tapes).
010COV.book Page 20 Wednesday, August 29, 2007 1:10 PM
