22
GB
~
• Make sure that the unit is completely turned off before unplugging the mains lead. Unplugging the mains
lead while the unit is turned on may cause the indicator to remain lit or may cause the unit to malfunction.
• Do not put anything over the indicators as their functions may be affected.
• When the media receiver is used vertically with the stand attached, the
0
and
qa
button functions (in the
unit menu) are exchanged.
Item
Description
1
Remote control sensor
Receives IR signals from the remote (if using an IR remote, not
supplied).
Do not put anything over the sensor, as its function may be affected.
2
1
(Power)
Turns the unit on or off.
~
• To disconnect the unit completely, pull the plug from the mains.
3
Light Sensor
Do not put anything over the sensor, as its function may be affected.
4
(Picture Off/Timer
indicator)
Lights up in green when the picture is switched off (page 46).
Lights up in orange when the reminder is set (page 25) or the timer is set
(page 33).
5
1
(Standby indicator)
Lights up in red when the unit is in standby mode.
6
"
(Power indicator)
Lights up in green when the unit is turned on.
7
LINK indicator
Lights up when the wireless connection between the media receiver and
monitor is stable.
8
(HOME)
Displays the media receiver Home menu in the media receiver mode
(page 32), or monitor Home menu in the monitor mode (page 41).
9
/
(Input select/OK)
In monitor mode: Selects the input source from equipment connected to
the unit sockets (page 27).
In unit menu: Selects the menu or option, and confirms the setting.
0
2
+/–/
/
In monitor mode: Increases (+) or decreases (–) the volume.
In unit menu: Moves through the options right (
) or left (
).
qa
PROG +/–/
/
In TV mode: Selects the next (+) or previous (–) channel.
In unit menu: Moves through the options up (
) or down (
).
HOME
