Service Procedure for Panel, Board and Software Change / Upgrade(WW)
5
1. SERVICE BOARD ---------------------------------------------------------------- 6
1-1. Steps After Replacing the Service Board
1-2. Images Supported by the Service Board
1-3. Preparing USB for Upgrade
1-4. How to Upgrade the Version by Using USB
1-5. Samples of Software Update screens
1-6. Additional steps for 1-4 (Forced update)
1-6-1. Change PID_DATA_MISMAT
1-6-2. How to Store Changed Data
1-7. Setting necessary items in the Service Menu
1-7-1. Selecting the Segment
1-7-2. How to Store Changed Data
1-7-3. Selecting the Destination
1-7-4. How to Store Changed Data
1-7-5. Selecting the Model Name
1-7-6. How to Store Changed Data
1-7-7. Adding the Serial Number (1/2)
1-7-8. Adding the Serial Number (2/2)
1-7-9. Selecting the BU TRANS
1-7-10. Confirming the Software version, Model ID and Product ID
1-8. Finish Operation
2. SERVICE PANEL --------------------------------------------------- 26
2-1. Steps After Replacing the Service Panel
2-2. Preparing USB for Upgrade
2-3. How to Upgrade the Version by Using USB
2-4. Samples of Software Update screens
2-5. Additional steps for 2-3 (Forced update)
2-5-1. Change PID_DATA_MISMAT
2-5-2. How to Store Changed Data
2-6. Setting necessary items in the Service Menu
2-6-1. Selecting the BU_FLASH
2-6-2. Confirming the Software version, Model ID and Product ID
2-7. Resetting the Panel Operation Time
2-8. Finish Operation
APPENDIX --------------------------------------------------------------- 38
TABLE OF CONTENTS
