- Change the setting of your wireless router (or access point) to 802.11n
if possible. For details on how to change the setting, refer to the
instruction manual of your wireless router (or access point), or contact
the person who set up the network (network administrator).
- If the above does not bring any improvement, change the setting of
your wireless router (or access point) to 5GHz, which may help improve
the video streaming quality.
- The 5GHz band may not be supported depending on your
region/country. If the 5GHz band is not supported, the TV can only
connect to a wireless router (access point) using the 2.4GHz band.
To use WEP security with a wireless router (or access point), select
[Expert] → [Wi-Fi Setup] → [Scan].
To use the WPS PIN method, select [Expert] → [Wi-Fi Setup] → [WPS
(PIN)].
Notes
The setting items (e.g. IP address, subnet mask, DHCP) may vary
depending on the Internet service provider or router. For details, refer to
the instruction manuals provided by the Internet service provider, or those
supplied with the router. Or contact the person who set up the network
(network administrator).
© 2014 Sony Corporation
132
