43
Usin
g the
Me
nus
HDMI inputs of this TV will recognize and communicate with other
Sony equipment equipped with
HDMI Control.
If you have missed the
Initial Setup
when you first connected the TV or if you want to scan all receivable
channels, you can run the
Initial Setup
. Follow the instructions on the screen. Settings such as picture and
sound adjustments will not be affected by this
Initial Setup
.
HDMI Settings
HDMI Control
On
/
Off
feature allows your TV to communicate with other equipment that supports
HDMI Control.
Device Auto Power Off
Select
On
to have your connected HDMI Control equipment power off automatically
when the TV is turned off. Select
Off
to disable this function.
TV Auto Power On
Select
On
to control your TV’s power on from your connected HDMI Control equipment.
Select
Off
to disable this function.
Device List
Displays a list of HDMI Control equipment connected to the TV.
General Settings
Language
Select the language of your choice from
English
,
Español
and
Français
to be used for
displaying all the on-screen settings.
Info Banner
Displays the program name and the program information such as program title and
program rating (if available from the broadcaster) when option is set to
On
. Select
Off
for
minimal display information. Selecting
Off
will not completely disable the banner
display.
Info Banner
also appears on the screen each time the channel is changed or
DISPLAY
on the remote control is pressed.
~
• To see the rating information on the banner,
Info Banner
setting must be set to
On
.
Power Saving
Reduces the power consumption by adjusting the lamp brightness. This also enhances the
black level.
Display Position
When selected, the guide markers for the TV
Display Position
will appear at four
corners of the screen. Adjust
Vertical
position and/or
Horizontal
position by pressing
V
/
v
/
B
/
b
buttons to evenly position the markers.
Cooling Mode
Select
High
to use the TV at an altitude of 5,000 feet (1,500 m) or higher.
Lamp Replacement
When the lamp nears the end of its life, a message will appear every time the TV is turned
on. After the lamp is replaced, select this option then follow the steps on screen.
Initial Setup
~
•
Favorites
list will be cleared each time you run the
Initial Setup
.
