background image

22

 GB

Picture menu

You can select the options listed below on the Picture 
menu.

1

Press 

F

/

f

 to select “Settings” on MENU, 

then press 

.

2

Press 

F

/

f

 to select a menu icon, then 

press .

3

Press 

F

/

f

/

G

/

g

 to select an option.

Target Inputs

For the input currently being viewed, select whether to use the common setting or to 
set each item separately.
“Common”: Applies common settings whose adjustments are shared with other 
inputs in which “Target Inputs” is set to “Common”. 
Current input name (e.g. Video 1): Allows you to set each option separately for the 
current input.

Tip

Set each input to “Common” if you require the same settings to apply to each input.

Picture Mode

Selects the picture mode.
“Vivid”: For enhanced picture contrast and sharpness.
“Standard”: For standard picture. Recommended for home entertainment.
“Custom”: Allows you to store your preferred settings.

Reset

Resets all the “Picture” settings except “Target Inputs” and “Picture Mode” to the 
factory settings.

Tip

“Advanced Settings” (page 24) is also not reset. Select “Reset” in “Advanced Settings” to reset 
items in “Advanced Settings”.

Advanced Iris

By selecting the iris option, you can obtain the best brightness and contrast suited for 
your TV viewing.
“Auto 1”*: Recommended option for viewing programs that have larger variation in 
brightness from scene to scene.
“Auto 2”*: Recommended option for viewing programs that have less variation in 
brightness from scene to scene.
“Max”: With this option, the screen has maximum level of brightness. It is suitable 
for TV viewing in a brightly lit room.
“High”: With this option, the screen becomes bright. It is suitable for TV viewing in 
a brightly lit room.
“Medium”: With this option, the brightness is about the standard level.
“Low”: With this option, the screen brightness dims and increases in contrast. It is 
suitable for TV viewing in a room with low lighting.
“Min”: With this option, the screen is dimmed but contrast is at a maximum. It is 
suitable for TV viewing in a room with low lighting.

* Automatically detects the brightness of the screen. These options are best suited for programs 

such as movies that often change between bright scenes and low light setting scenes.

Note

This function is not available in twin picture or picture freeze mode.

Summary of Contents for Bravia KDS-60R2000





















































Reviews: