Sony Bravia KLV-32V400B Operating Instructions Manual Download

Page: 9 / 36

KLV-32V400B

3-879-650-

(1)

Safety information

Installation/Set-up

Install and use the TV set in accordance with the
instructions below in order to avoid any risk of fire,
electrical shock or damage and/or injuries.

Installation

• The TV set should be installed near an easily accessible

AC power outlet.

• Place the TV set on a stable, level surface to avoid it from

falling down and cause personal injury or damage to the
TV.

• Only qualified service personnel should carry out wall

installations.

• For safety reasons, it is strongly recommended that you

use Sony accessories, including:
Wall-mount bracket SU-WL500 and SU-WL50B
TV stand SU-FL300M

• Be sure to use the screws supplied with the Wall-mount

bracket when attaching the mounting hooks to the TV set.
The supplied screws are designed so that they are 8 mm to
12 mm in length when measured from the attaching
surface of the mounting hook.
The diameter and length of the screws differ depending on
the Wall-mount bracket model.
Use of screws other than those supplied may result in
internal damage to the TV set or cause it to fall, etc.

Transporting

• Before transporting the TV set,

disconnect all cables.

• Two or more people are needed to

transport a large TV set.

• When transporting the TV set by

hand, hold it as shown on the right.
Do not put stress on the LCD panel.

• When lifting or moving the TV set,

hold it firmly from the bottom.

• When transporting the TV set, do

not subject it to jolts or excessive
vibration.

• When transporting the TV set for

repairs or when moving, pack it
using the original carton and
packing material.

Ventilation

• Never cover the ventilation holes or

insert anything in the cabinet.

• Leave space around the TV set as

shown below.

• It is strongly recommended that you

use a Sony wall-mount bracket in
order to provide adequate air-
circulation.

Installed on the wall

Installed with stand

• To ensure proper ventilation and prevent the collection of

dirt or dust:
– Do not lay the TV set flat, install upside down,

backwards, or sideways.

– Do not place the TV set on a shelf, rug, bed or in a closet.
– Do not cover the TV set with a cloth, such as curtains,

or items such as newspapers, etc.

– Do not install the TV set as shown below.

AC power cord

Handle the AC power cord and outlet as follows in
order to avoid any risk of fire, electrical shock or
damage and/or injuries:

– Use only Sony supplied AC power cords, not those of

other brands.

– Insert the plug fully into the AC power outlet.
– Operate the TV set on a 110-240 V AC supply only.
– When wiring cables, be sure to unplug the AC power

cord for your safety and take care not to catch your feet
on the cables.

– Disconnect the AC power cord from the AC power

outlet before working on or moving the TV set.

– Keep the AC power cord away from heat sources.
– Unplug the AC power plug and clean it regularly. If the

plug is covered with dust and it picks up moisture, its
insulation may deteriorate, which could result in a fire.

Notes

• Do not use the supplied AC power cord on any other

equipment.

• Do not pinch, bend, or twist the AC power cord

excessively. The core conductors may be exposed or
broken.

• Do not modify the AC power cord.
• Do not put anything heavy on the AC power cord.
• Do not pull on the AC power cord itself when

disconnecting the AC power cord.