C:\Users\fle1\Desktop\Group H38\4477657E11\4477657E11\US03STU.fm
XBR-X855A
4-477-657-
E1
(1)
9
Getting Started
~
•
The image is merely illustrative, depending on
your model, the infrared receiver positioning may
be different of the illustration.
Before setting up your
TV
Some TV models are packaged with a detached
Table-Top Stand so you can mount your TV to a
wall right away. See page 20 (Using a Wall-
Mount Bracket) if you want to mount the TV to a
wall. If you are not mounting the TV to a wall,
you will need to attach the Table-Top Stand.
You will need a Phillips screwdriver (not
supplied) and the supplied screws to complete
the task. Look for the supplied Table-Top Stand
instruction leaflet.
Be sure to consider the following while setting
up your TV:
• Disconnect all cables when carrying the TV.
• Carry the TV with the adequate number of
people; larger size TVs require two or more
people.
• Correct hand placement while carrying the
TV is very important for safety and to avoid
damage.
• Ensure your TV has adequate ventilation,
• For best picture quality, do not expose the
screen to direct illumination or sunlight.
• Avoid installing the TV in a room with
reflective wall and floor materials.
• Avoid moving the TV from a cold area to a
warm area. Sudden room temperature
changes may cause moisture condensation.
This may cause the TV to show poor picture
and/or poor color. Should this occur, allow
moisture to evaporate completely before
powering the TV on.
• Ensure that there are no objects in front of
the TV.
IR Sensor
3D Sync
Transmitter