C:\Users\fle1\Desktop\Group H38\4477657E11\4477657E11\US03STU.fm
XBR-X855A
4-477-657-
E1
(1)
10
1: Attaching the Table-
Top Stand
Refer to the supplied Table-Top Stand leaflet for
proper attachment.
~
•
Do not put stress on the LCD panel or the frame
around the screen.
•
Be careful to not pinch your hands or the AC
power cord when you install the TV set to the
Table-Top Stand.
1
Place the TV set on the Table-Top Stand.
Arrow direction shows front of the Table-Top
Stand.
2
Fix the TV to the Table-Top Stand using the
supplied screws. The arrow marks
indicate the location of the screw holes used
for securing the Table-Top Stand.
~
•
If using an electric screwdriver, set the torque
at approximately 1.5 N·m {15 kgf·cm}.
To detach the Table-Top Stand from the TV,
remove the screws
fixed in step 2.
~
•
Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
•
Be sure the TV is vertical before turning on. To
avoid uneven picture uniformity do not power on
the TV with the LCD panel facing down.
•
When installing the TV on a wall, remove the
screws from the rear of the TV. Be sure to store
the removed screws in a safe place, keeping
them away from children.
•
When attaching the Table-Top Stand again, be
sure to fasten the screws (previously removed) to
the original holes on the rear of the TV.
Detaching the Table-Top
Stand from the TV
