27
US
US
This TV’s instruction manual only shows the steps on preparing the installation of the TV
before installing to the wall.
Your TV can be mounted on a wall using a Wall-Mount Bracket (not supplied) out of the box
as packaged. If the Table-Top Stand is attached to the TV, the TV may require detaching the
Table-Top Stand.
Prepare the TV for the Wall-Mount Bracket before making cable connections.
For product protection and safety reasons, Sony strongly recommends that installation of
your TV on the wall be performed by qualified professionals. Do not attempt to install it
yourself.
Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient
expertise is required in installing this TV, especially to determine the strength of the wall for
withstanding the TV’s weight.
The length of the screw for Wall-Mount Bracket differs depending on the Wall-Mount Bracket
thickness. Please see below illustration.
Screw hole for the optional Wall-Mount Bracket (Upper side)
Screw hole for the optional Wall-Mount Bracket (Lower side)
Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready to
attach the Table-Top Stand. Keep the screws away from small children.
Note
• Read the supplied Safety Booklet for additional safety information.
1
Remove the screws from the rear of the TV.
Using an optional Wall-Mount Bracket
Screw (M6)
Wall-Mount Bracket
8 mm - 12 mm
Screw (M6)
Wall-Mount Bracket
24 mm - 30 mm
M6 × 12
XBR-75X900C
XBR-65/55X900C
M6 × 16
